On 5/30/2023 found the leak on the pinched line from the factory. I removed those and put some ports in which we fixed the leak problem. I pulled a vacuum on the system to removed any moisture in the system. Then I add 134a back to the system per spec. I watch the system cycle…
Read morePerformed Preventative Maintenance on 4 Refrigerators
On 5/25/2023 Performed Preventative Maintenance on 4 refrigerators (1 single door, 2 double door, 1 three door) 1 prep table, 1 freezer and 3 keg a raters in Manor Texas. Near N Lexington St. Manor, Texas 78635 Check out the Areas We Serve and jobs we are doing by clicking: https://prorefrigerate.com/areas-we-serve/ [spacer][SHORTCODE_ELEMENTOR id=3505]
Read moreAdjusted the Defrost Clock to 3x A Day
On 5/24/2023 After deicing evap I adjusted the defrost clock to 3x a day for 45min. Found the high-pressure switch tripped on stuck open. I had to adjust to turn the compressor back on. Adjusted high pressure switch to turn compressor off at 300psi in Georgetown Texas. Near South Church Street Georgetown, Texas 78626 Check…
Read moreCondenser Fan Motors Were Bad
On 5/19/2023 Arrived on site found that the condenser fan motors were bad and the start components for the compressor I replace both fan motors and start components and watch the cooler get down to temp in Austin Texas. Near S Lamar Blvd Austin, Texas 78704 Check out the Areas We Serve and jobs we…
Read more